ICP DAS Data Acquisition

• 24 Relay Ethernet I/O
• Built in Modbus TCP Slave and Modbus RTU protocol
• Includes free utility and simple monitoring software
• Easy to use:  Users do not have to write their own programs!
• Configured by Web HMI

The ET-6000 series also supports various Modbus functions. For example, Modbus/TCP slave, Modbus/TCP to Modbus/RTU gateway, Modbus/RTU master, Modbus/RTU slave; meaning the ET-6000 series can easily be integrated into any SCADA software environment using the Modbus protocol.

• Web HMI
  • The Web HMI function allows users to create attractive, dynamic web pages to monitor and control the I/O points. Users can upload specific I/O layout pictures (bmp, jpg, gif formats) and define a description for each I/O point. No HTML or Java skills are needed to create the web pages.

• Communication Security
  • An Account and password is needed when logging into the ET-6000 web server.
  • An IP address filter is included; which can be used to allow or deny connections from specific IP addresses.
• Modbus protocol
  • The Modbus/TCP slave function on the Ethernet port can be used to provide data to remote SCADA software. 
  • The Modbus/RTU slave function on the RS-232 port can be used to connect to a local HMI.  
  • The Modbus /TCP to Modbus/RTU gateway function through the Ethernet port to the RS-232 port can be used to upgrade a serial device with Ethernet communication ability
• Built-in Multi-function I/O
  • An LED indicator is used for each DI or DO channel
• All Digital Output modules provide :
  • Power on value (On boot up, the DO status is set to the Power-on value)
  • Safe value (If Modbus/TCP communication is lost for a specified period,the DO status is set to the safe value)
• All Digital Input modules provide :
  • High/Low latched status
  • DI channels can also be used as DI status and 16-bit low speed (100Hz) counters
• All-in-one module
  • The various I/O components are mixed with multiple channels in a single module
  • Provides the most cost effective I/O usage and enhances performance of the I/O operations
• 3-way isolated noise/surge protection
  • Potect the hardware from damage caused by noise and surges
  • Designed with isolation circuits for Ethernet, I/O and Power.
• Portable Configuration
  • All configuration settings can be saved to the EEPROM on the ET6000
  • EEPROM is mounted on a daughter board (called the “portable” board)
  • The settings can stored and easily backed up and moved.
• Built-in Dual Watchdog
  • Dual Watchdog consists of a Module Watchdog and a Host Watchdog.
  • Module Watchdog is a built-in hardware circuit
    • Can be used to monitor the operation of the module
    • Will reset the CPU module if a failure occurs in either the hardware or the software.
  • Host Watchdog is a software function
    • Can be used to monitor the operating status of the host
    • Is used to prevent network communication problems or host failures
• Automatic MDI / MDI-X crossover for plug-and-play
  • RJ-45 port supports automatic MDI/MDI-x that can automatically detect the type of connection to the Ethernet device without requiring special straight or crossover cables.
• Ventilated housing designed to operate between -25°C and +75°C
  • The ET-6000 is housed in a plastic-based shell/case with a column-like ventilator that helps to cool the working environment inside the shell/case
  • Allows the ET-6000 to operate at temperatures ranging from -25°C and +75°C.
• I/O pair connection
  • This function is used to create a DI to DO pair through the Ethernet.
  • Once the configuration is complete, the ET-6000 module can poll the status of local DI channels and then use the Modbus/TCP protocol to continuously write to a remote DO device in the background.