PET-7018Z: 10-channel Thermocouple, Voltage and Current Input with High Voltage Protection and 6-channel Isolated Digital Output PoE Data Acquisition Module, communicable and Powered over Ethernet and Modbus TCP Protocol

PET-7018Z

Product Reference & Support :

10-channel Thermocouple, Voltage and Current Input with High Voltage Protection and 6-channel Isolated Digital Output PoE Data Acquisition Module, communicable and Powered over Ethernet and Modbus TCP Protocol

Product Pricing:

PET-7018Z: $579.00

Please Call 1-888-971-9888 for Volume and OEM discount pricing!

Features

PET-7018Z is a web-based Ethernet I/O module that features a built-in web server which allows configuration, I/O monitoring and I/O control through a regular web browser. With the web HMI function, no programming or HTML skills are needed to create dynamic and attractive web pages for I/O monitoring and I/O control The PET-7018Z offers easy and safe access for users from anytime and anywhere! In addition, PET-7018Z also supports Modbus/TCP protocol that makes seamless integration to SCADA software.

Power-over-Ethernet (PoE) allows power and data to be carried over a single Ethernet cable so a device can operate solely from the power it receives through the Ethernet data cable. This innovation allows greater flexibility in office design, higher efficiency in systems design, and faster turnaround time in set-up and implementation.

PET-7018Z features true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) using both Ethernet pairs (Category 5 Ethernet cable). PET-7018Z can receive power from auxiliary power sources like AC adapters and batteries in addition to the PoE enabled network. This is a desirable feature when the total system power requirements exceed the PSE's load capacity. With the auxiliary power option, the PET-7018Z can be used in standard Ethernet (non-PoE) systems.

The PET-7018Z is a 16-bit, 10-channel differential analog inputs and 6-channel digital ouputs module that provides programmable input range on all analog channels(±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA and thermpocouples) and digital output can be set alarm output. Each analog channel is allowed to configure an individual range and has 240 VAC high over voltage protection

IEEE 802.3af-compliant Power over Ethernet (PoE)
Built-in Web Server
Modbus/TCP Protocol
I/O Pair Connection
10/100 Base-TX Ethernet
Support Current Input, Voltage Input and Thermocouple Input
Individual Channel Configuration
Open Wire Detection
Over Voltage Protection is up to 240 Vrms
6-channel Digital Output for Alarm Output
Automatic Compensation Each Channel
2-way Isolation/ESD Protection
Applications:
- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote diagnosis
- Testing Equipment

Specifications & Additional Information

CPU
CPU	80186 CPU (80MHz)
SRAM	512K Bytes
Flash Memory	512K Bytes
EEPROM	16K Bytes
Dual Watchdog	Yes
Communication
Ethernet Port	10/100 Base-TX (With Link, Activity LED Indicator) Automatic MDI/MDI-X
Analog Input
Input Channels	10 Differential
Input Type	±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V ±20 mA, 0~20 mA, 4~20 mA (Requires Optional External 125 Ohms Resistor) Thermocouple (J, K, T, E, R, S, B, N, C, L, M, LDIN43710)
Resolution	16-bit
Sampling Rate	10 samples/Sec. total
Accuracy	±0.1% or better
BandWidth	15.7 Hz
Zero drift	±0.5 μV/°C
Span drift	±25 ppm/°C
Input Impedance	>300K Ohms
Common Mode Rejection	150 dB min.
Normal Mode Rejection	100 dB
Open Thermocouple Detection	Yes
Individual Channel Configuration	Yes
Over Voltage Protection	240 Vrms
ESD Protection	4kV Contact for each terminal, and 8KV Air for random point
EFT Protection	4kV for Power
Digital Output
Output Channels	6 (Sink)
Output Type	Isolated Open-Collector
Max Load Current	700mA/Channel
Load Voltage	5 ~ 50 VDC
DB-1820
Wire Strip Length	4~5 mm
Wire Range	16~24 AWG
2 Way Isolation
Ethernet	1500 VDC
AI and DO	2500 VDC
LED Indicator
PoE	PoE On
L1	Run
L2	Link/Act
L3	10/100 M
Mounting
Din Rail Mount	Yes
Wall Mount	Yes
LED Indicator
PoE	PoE On
L1	Run
L2	Link/Act
L3	10/100 M
Power Requirements
IEEE 802.3af	Class 1
Required Supply Voltage	Powered by Power-Over-Ethernet (PoE) or auxiliary power +12 ~ 48 VDC(non-regulated)
LED Indicator	Yes
Power Consumption	0.12 A @ 24 VDC Max.
Environment
Operating Temperature	-25 ~ +75°C
Storage Temperature	-30 ~ +80°C
Relative Humidity	5 ~ 90% RH, non-condensing
Dimensions
Dimensions( W x H x D)	123 mm x 72 mm x 35 mm

Thermocouple Type	Range (°C)
J	-210 ~ +760
K	-270 ~ +1372
T	-270 ~ +400
E	-270 ~ +1000
R	0 ~ +1768
S	0 ~ +1768
B	0 ~ +1820
N	-270 ~ 1300
C	0 ~ 2320
L	-200 ~ +800
M	-200 ~ +100
L (DIN43710)	-200 ~ +900

	Data Acquisition Home

	Remote I/O

	PC Based I/O

	Rack Based I/O

	Zigbee I/O

	New DAQ Products

KingView High-Performance PC Software for Building Data Information Service Platform or SCADA System More Info	NS-205 Unmanaged 5-Port Industrial Ethernet Switch with Din Rail Mount - Operating Temperature -40 ~ +75 �C More Info	NS-205-IP67 Unmanaged 5-Port Dustproof and Waterproof Industrial Ethernet Switch with IP67 Casing. Compatible with Sixnet, Stride, Hirschmann, and other industrial Ethernet Switches. More Info	PET-7060 6-channel Power Relay Output and 6-channel Isolation Digital Input Data Acquisition, communicable and Powered over Ethernet and Modbus TCP Protocol More Info
I-950-ENC IP66 Small Industrial Enclosure with dimensions 254mm x 180mm x 90mm More Info	I-3625-ENC Large IP66 Industrial Enclosure with Dimensions 360 x 254 x 165mm More Info	DIN-KA52F-48 48V/0.52A, 25 W Power Supply with Din-Rail Mounting More Info	uPAC-7186EX/D-FD Data Acquisition Controller with 64 MB NAND Memory. D version has a display with 80 Mhz CPU More Info

ICP DAS Data Acquisition